128x128, General 1.5inch OLED display Module
Please inform me as soon as the product is available again.
- Order number: Waveshare-13992
- Manufacturer product ID: 13992
This is a general OLED display Module, 1.5inch diagonal, 128x128 pixels, 16 gray scale, with... more
Product information "128x128, General 1.5inch OLED display Module"
This is a general OLED display Module, 1.5inch diagonal, 128x128 pixels, 16 gray scale, with embedded controller, communicating via SPI or I2C interface.
Features
- 128x128 high resolution
- 16 gray scale, better display effect
- Supports SPI or I2C interface, configured via onboard resistor
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
- Driver: SSD1327
- Interface: SPI / I2C
- Display color: White
- Gray scale: 16
- Resolution: 128x128 (most other competitive products are typically 128x64)
- Viewing angle: >160°
- Operating voltage: 3.3V / 5V
- Dimension: 44.5 x 37 (mm)
Interface
| Symbol | Description |
|---|---|
| VCC | Power (3.3~5V input) |
| GND | Ground |
| DIN | Data input |
| CLK | Clock data input |
| CS | Chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | Reset, low active |
There are two available drive interfaces for this OLED module: 4-wire SPI and I2C:
| BS | CS | DC | DIN | CLK | |
|---|---|---|---|---|---|
| 4-wire SPI | 0 | Chip select | Data/Command | MOSI | SCK |
| I2C | 1 | NC | I2C address selection | SDA | SCL |
Dimensions
PACKAGE CONTENT
- 1.5inch OLED Module x1
- PH2.0 7Pin x1
Related links to "128x128, General 1.5inch OLED display Module"
Read, write and discuss reviews... more
Customer evaluation for "128x128, General 1.5inch OLED display Module"
Write an evaluation
Evaluations will be activated after verification.
Viewed