600x448, 5.83inch E-Ink display HAT for Raspberry Pi
Please inform me as soon as the product is available again.
- Order number: Waveshare-14597
- Manufacturer product ID: 14597
This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600x448 resolution, with embedded... more
Product information "600x448, 5.83inch E-Ink display HAT for Raspberry Pi"
This is an E-Ink display HAT for Raspberry Pi, 5.83inch, 600x448 resolution, with embedded controller, communicating via SPI interface.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Features
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
- SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
Specifications
- Operating voltage: 3.3V~5V
- Interface: SPI
- Outline dimension: 125.40mm × 99.50mm
- Display size: 118.80mm × 88.26mm
- Dot pitch: 0.198 × 0.197
- Resolution: 600 × 448
- Display color: black, white
- Grey level: 2
- Full refresh time: 3.5s
- Refresh power: 26.4mW(typ.)
- Standby power: <0.017mW
- Viewing angle: >170°
Interface
| Symbol | Description |
|---|---|
| VCC | 3.3V~5V |
| GND | Ground |
| DIN | SPI MOSI pin |
| CLK | SPI SCK pin |
| CS | SPI chip selection, low active |
| DC | Data/Command selection (high for data, low for command) |
| RST | External reset, low active |
| BUSY | Busy status output, low active |
PACKAGE CONTENT
- 5.83inch e-Paper x1
- e-Paper Driver HAT x1
- RPi screws pack (2pcs) x1
- PH2.0 20cm 8Pin x1
Dimensions
Related links to "600x448, 5.83inch E-Ink display HAT for Raspberry Pi"
Read, write and discuss reviews... more
Customer evaluation for "600x448, 5.83inch E-Ink display HAT for Raspberry Pi"
Write an evaluation
Evaluations will be activated after verification.
Viewed