Top seller
No results were found for the filter!
LIDAR-Lite Accessory Cable This is the same accessory cable found in the LIDAR-Lite v3. The LIDAR-Lite Accessory Cable is terminated with a simple 6-pin JST at one end and a bare wire pigtail at the other. You can use this cable as a replacement to the one you are...
₹599.00 *
2.4GHz Duck Antenna RP-SMA 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. The FCC is moving towards Part 15 compliance. All this means is that all the SMA RF connectors are...
₹779.00 *
Alligator Test Leads - Multicolored (Pack of 10) Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench itself. Whether you’re just trying to make a few quick connections to test your circuit or having trouble...
₹319.00 *
Flexiforce Pressure Sensor-1lb This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing lightly, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but the resistance does...
₹2,049.00 *
SparkFun Mini GPS Shield The SparkFun Mini GPS Shield equips your Arduino Mini with access to a GPS module, µSD memory card socket and all of the other peripherals you’ll need to turn your Arduino into a position-tracking, speed-monitoring, altitude-observing...
₹1,379.00 *
SparkFun Serial Controlled Motor Driver The SparkFun Serial Controlled Motor Driver (SCMD) is a DC motor driver that’s been designed to drive small DC motors with ease. The SCMD is designed to emulate a typical register-based device in operation. It can be commanded by UART, I...
₹1,689.00 *
Bus Pirate Cable This is an interface cable for the Bus Pirate , designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-board the Bus Pirate,...
₹489.00 *
SparkFun Bus Pirate - v3.6a The Bus Pirate v3.6a, created by Ian Lesnet , is a troubleshooting tool that communicates between a PC and any embedded device over 1-wire, 2-wire, 3-wire, UART, I 2 C, SPI, and HD44780 LCD protocols - all at voltages from 0-5.5VDC. This...
₹2,989.00 *
2.4GHz Duck Antenna RP-SMA - Large Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector. Dimensions: 0.5x7.7"
₹979.00 *
SparkFun RedBoard - Programmed with Arduino At SparkFun we use many Arduinos and we’re always looking for the simplest, most stable one. Each board is a bit different and no one board has everything we want, so we decided to make our own version that combines all our favorite...
₹1,989.00 *
Flex Sensor 4.5" A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Glove . I love the...
₹2,029.00 *
SparkFun Photon Weather Shield The SparkFun Photon Weather Shield is an easy-to-use add-on board that grants you access to barometric pressure, relative humidity, and temperature. There are also connections on this shield to optional sensors such as wind speed,...
₹3,459.00 *
Stackable Graphic LCD SparkFun SparkFun RGB Makey Makey Button Pad 4x4 MyoWare 2.0 LED Slide Pot - Magnetic Card SparkFun Triple Output SparkFun Copper Tape - Flexiforce Coin Acceptor - Spring JST SH Jumper 4 Solder Tip Teensy 4.0 Slide Pot - Concave Button LED String Pocket Geiger S-Video Cable - SparkFun Pulse SparkFun Qwiic Electric Hobby Li-Ion Polymer Load Cell - SparkFun Block Header - 8-pin HackRF One from 7-Segment Stackable RFID Tag - SST Liquid Big Dome Push Micro Gearmotor Flexinol - GNSS L1 L5 Garmin SparkFun USB SparkFun SparkFun Load ProtoSnap - SparkFun LoRa
Viewed