Top seller
No results were found for the filter!
Seeeduino ADK Main Board Seeeduino ADK Main Board is based on Android Open Accessory Development Kit (ADK). Compared to the Google's ADK Reference design, Seeeduino ADK has many added features like support of both 5V and 3.3V I/O (logic with a switch), smaller...
₹1,639.00 *
Seeeduino Stalker v2 Seeeduino Stalker is a feature rich Arduino compatible Wireless Sensor Network node. Its modular structure and onboard peripherals makes it convenient to log and time stamp sensor data on a periodic basis. The Seeeduino Stalker is a good...
₹2,189.00 *
Gas Sensor Socket This socket is a handy accessory for your gas sensors. You can use it to extend the leads of gas sensors and Smoke Sensor. It helps you can mount gas sensor on breadboard or protect gas sensor from the heat of soldering.
₹49.00 *
LED Dot Matrix 8x8 RGB Do you know how is the cool advertising display made? It is exactly composed of these small RGB LED matrix. If you want to make a similar display, this RGB LED matrix will meet you need. The 8x8 LED matrix has 32 of pins, you may need a...
₹2,029.00 *
Spark Core with u.FL Connector The Spark Core is an Arduino-compatible, Wi-Fi enabled, cloud-powered development platform that makes creating internet-connected hardware a breeze. This little board packs a punch: with a 72 MHz ARM Cortex M3, the best Wi-Fi module on...
₹4,289.00 *
Spark Core with Chip Antenna The Spark Core is an Arduino-compatible, Wi-Fi enabled, cloud-powered development platform that makes creating internet-connected hardware a breeze. It is a tiny Wi-Fi development board, open source, widely successful funded Kickstarter...
₹4,289.00 *
Shield Shield for Spark Core The Spark Core is an Arduino-compatible, Wi-Fi enabled, cloud-powered development platform that makes creating internet-connected hardware a breeze. This shield is essentially an adapter that allows the user to connect Arduino compatible...
₹2,199.00 *
Rainbowduino LED driver platform - Atmega 328 The Rainbowduino board (V3.0) is an Arduino compatible controller board with professional multiplexed LED driver. It can drive a 8x8 RGB Led Matrix or a 4x4x4 RGB LED Cube in common Anode mode. Rainbowduino v3.0 uses two MY9221 chips...
₹2,739.00 *
Soil Moisture & Temperature Sensor Moisture and temperature of soil are two main concerns in agricultural area. This sensor is prepared for applications that require precise monitoring over moisture and temperature conditions. The SHT-10 sensor inside brings satisfying...
₹4,389.00 *
Grove - EMG Detector EMG detector is a bridge connects human body and electrical, the sensor gathers small muscle signal then process with 2th amplify and filter, the output signal can be recognized by Arduino. You can add this signal into your control...
₹3,289.00 *
SODAQ - Microcontroller for Solar Data Acquisition The SODAQ (Solar Data Acquisition) is an Arduino compatible data acquisition board designed by Gregory Knauff. The SODAQ is a multi-feature microcontroller board that lets you connect sensors and devices to the internet, quickly and with...
₹4,289.00 *
DSO Quad - Aluminium Alloy Black DSO Quad - Aluminum Alloy now is available at Seeed Studio. A new, rigid, elegant aluminum alloy shell makes the Quad even better. This is the coolest tool you should have on your workable! DSO Quad is a pocket size 4 channel digital...
₹21,869.00 *
Arch Max - Hardware HPS-167 ToF GrovePi Zero Grove - Haptic Seeeduino Wireless Grove - IoT Arduino 8-Channel 10 Segment LED Soil Moisture Pixhawk 4 - Grove - Mouse ReSpeaker 6-Mic Disposable ECG SRF shield - ReSpeaker Mic BitGadget Kit - ReSpeaker 4-Mic Grove - EMG Crazyflie 2.0 Grove - Grove - Rainbowduino Grove - Air 2V 1W Thin-film RFID tag combo Remote AI LG01-N Single ReSpeaker Core Energy Shield CAN-BUS Shield Bluetooth Sipeed MAIX-I Grove Starter Grove - Piezo Shield Shield ReSpeaker 4-Mic Grove - Wire Strippers Grove - 3-Axis Grove - Speech Grove - I2C BitMaker - Sipeed MAix BiT
Viewed