XBee Wi-Fi Module 2400MHz 72000Kbps 20-Pin - XB2B-WFPT-001

XBee Wi-Fi embedded RF modules provide simple serial to IEEE 802.11 connectivity. By bridging the low-power/low-cost requirements of wireless device networking with the proven infrastructure of 802.11, the XBee Wi-Fi creates new wireless opportunities for energy management, process and factory automation, wireless energy management, process and factory automation, wireless easy provisioning methods and native Device Cloud by Etherios™ connectivity.

XBee Wi-Fi modules give developers the fastest IP-to-device and device-to-cloud capability possible. Focused on the rigorous requirements of these wireless device networks, the module gives developers IP-to-device and device-to-cloud capability.

XBee modules offer developers tremendous flexibility and are available in surface mount and through-hole form factors. The XBee Wi-Fi shares a common footprint with other XBee modules. This allows different XBee technologies to be drop-in replacements for each other.

As a member of the XBee family, the XBee Wi-Fi combines hardware with software for a complete modular solution. XBee Wi-Fi modules are designed to communicate with access points in existing 802.11 infrastructures. Developers can use AT and API commands for advanced configuration options.

FEATURES

• Native Device Cloud integration for data acquisition and device management

• Hardware and software complete module easily joins existing 802.11 b/g/n (Wi-Fi) infrastructures

• Common XBee footprint allows OEMs to support a variety of wireless protocols

• Flexible SPI and UART serial interfaces

• Available in Surface Mount and Through-Hole form factors

• Support for low-power sleeping applications with<6 μA power-down current

• Over-the-air data rates up to 72 Mbps

• Simple provisioning methods including Soft AP and Wi-Fi Protected Setup (WPS)

SPECIFICATION

• Serial Data Interface: UART up to 1 Mbps, SPI up to 6 Mbps

• Configuration Method: API or AT commands

• Frequency Band: ISM 2.4 GHz

• ADC Inputs: 4 (12-bit)

• Digital I/O: 10

• Form Factor: Through-Hole, Surface Mount

• Antenna Options: PCB (Embedded), U.FL, RPSMA, Integrated Wire

• Operating Temperature: -30º C to +85º C

• Dimensions (L x W): 0.960 in x 1.297 in (2.438 cm x 3.294 cm)

• Security: WPA-PSK,WPA2-PSK and WEP

• Channels: 13 channels

• Standard 802.11b/g/n

• Data Rates 1 Mbps to 72 Mbps

• Modulationc: CCK, DSSS

• Transmit Power: Up to +16 dBm

• Receiver Sensitivity: -93 to -71 dBm

• Supply Voltage: 3.14 - 3.46 VDC

• Transmit Current: Up to 309 mA

• Receive Current: 100 mA

• Power-Down Current:<6 µA @ 25º C

Technical Details

Part List