GPy Multipack

Please inform me as soon as the product is available again.

₹10,389.00 *

Prices incl. VAT plus shipping costs

Out of Stock

Order number: MGSL10178
Manufacturer product ID: 10178

The GPy Expansion Board Bundle features the GPy, the only LTE CAT M1 / NB1 and... more

Close menu

Product information "GPy Multipack"

The GPy Expansion Board Bundle features the GPy, the only LTE CAT M1 / NB1 and MicroPython combo micro controller on the market today – the perfect enterprise grade IoT platform for your connected Things. With the latest Espressif ESP32 SoC, the GPy offers a perfect combination of power, friendliness and flexibility. Also included in this bundle is the LTE-M Antenna and your choice of expansion board or sensor shield. This Multipack allows you to get 1, 2 or 5 of GPy and 1, 2 or 5 each of either Expansion Board, Pysense, Pytrack or Pyscan.

Create and connect your things everywhere. Fast.

Pyscan Features

3 axis 12-bit accelerometer
Ambient light sensor
RFID-NFC Chip
USB port with serial access
LiPo battery charger
MicroSD card compatibility
Ultra low power operation (~1uA in deep sleep)
NFC / RFID Antenna included

Pytrack Features

Super accurate GNSS Glonass GPS
3 axis 12-bit accelerometer
USB port with serial access
LiPo battery charger
MicroSD ard compatibility
Ultra low power operation (~1uA in deep sleep)

Pysense Features

Ambient light sensor
Barometric pressure sensor
Humidity sensor
3 axis 12-bit accelerometer
Temperature sensor
USB port with serial access
LiPo battery charger
MicroSD card compatibility
Ultra low power operation (~1uA in deep sleep)

Expansion Board Features

USB and LiPo battery powered
FT234XD USB to serial converter
LiPo battery charger (BQ24040), with options for two different charging currents (100mA and 450mA)
TPS2115A with reverse voltage protection
MicroSD card slot
Three female headers to easily plug in the WiPy 2.0, LoPy, SiPy, FiPy or GPy.
JST style battery connector
Power LED and charge status LED
One user LED and one user switch
Battery voltage monitoring via the WiPy ADC
Lots of jumpers to enable/disable features

GPy Features

Powerful CPU
1KM WiFi range
MicroPython enabled
Fits in a standard breadboard (with headers)
Ultra-low power usage: fraction compared to other connected microcontrollers

Tx/Rx Frequencies

Ports for LTE Bands	Tx frequencies	Rx frequencies
Low bands 5, 8, 12, 13, 18, 19, 20, 28	699 to 915 MHz	729 to 960 MHz
Mid bands 1, 2, 3, 4	1710 to 1980MHz	1805 to 2170 MHz

Cellular Operating Frequencies

17 bands supported from 699Mhz to 2690Mhz (Total world-wide support)
Bands supported are currently: 1, 2, 3, 4, 5, 8, 12, 13, 14, 17, 18, 19, 20, 25, 26, 28, 66

Cellular Specification

One single chip for both CAT M1 and NB1
3GPP release 13 LTE Advanced Pro
Supports narrowband LTE UE categories M1/NB1
Integrated baseband, RF, RAM memory and power management
Reduced Tx power class option
Peak power estimations: TX current = 420mA peak @1.5Watt RX current = 330mA peak @1.2Watt
Data rates:
300kbps DL
375 kbps UL (LTE Cat M1 in 1.4Mhz in 1.4 Mhz, HD-FDD)
40 kbps DL
55kbps UL (LTE Cat M2 in 200 kHz, HD-FDD)

Interfaces

2 x UART, 2 x SPI, I2C, I2S micro SD card
Analog channels: 8_12 bit ADCs, 2_8 bit DAC
Timers: 2_64 bit with PWM with up to 16 channels
DMA on all peripherals

Power

Voltage Input: 3.3V 5.5V
3v3 output capable of sourcing up to 400mA

Processing

Espressif ESP32 SoC
Dual processor WiFi radio system on chip
Network processor handles the WiFi connectivity and the IPv6 stack
Main processor is entirely free to run the user application
An extra ULP-coprocessor that can monitor GPIOs, the ADC channels and control most of the internal peripherals during deep-sleep mode while only consuming 25uA

Security & Certifications

SSL/TLS support up to 1.2
WPA Enterprise security
AES encryption engine

Memory

RAM: 4MB
Flash Memory: 8MB
GPIO: Up to 22
Hardware floating point acceleration
Python multi-threading

Hash / Encryption

SHA, MD5, DES, AES

WiFi Networking

802.11b/g/n 16mbps

Bluetooth

Low energy and classic

RTC

Running at 32KHz

Size

55mm x 20mm x 3.5mm (Without Headers)

Weight

Location Services Supported

GPS
GLONASS
Galileo
QZSS

Use with Pybytes

Crafted by a group of Pycom back-end experts, the Pybytes platform will be everything there needs to be in place to gather, organise and display your data free of charge in the cloud. Regardless of whether you are a company, IoT system architect or an ambitious tech hobbyist we’ll soon have you connected.

Size

55m x 35mm x 10mm

Weight

11g (Standalone)

Cellular Antenna

External LTE-M Antenna Kit for use with the FiPy and GPy development boards.

Specification

Lte band 28/38*2
Frequency: 703~803/2520~2620(MHz)
Antenna size: 75 x 21 (mm)
PCB 0.6 mm

Low bands

(5, 8, 12, 13, 18, 19, 20, 28)
Tx frequencies 699 to 915 MHz
Rx frequencies 729 to 960 MHz

Mid bands

(1, 2, 3, 4)
Tx frequencies 1710 to 1980MHz
Rx frequencies 1805 to 2170 MHz