- Order number: MGSL10177
- Manufacturer product ID: 10177
The SiPy Multipack of 1, 2 or 5 development boards that lets you add sensor shields and antennas in a bundle.
With Sigfox, Wifi and BLE, the SiPy is a triple bearer MicroPython enabled micro controller that enabled flexible connectivity to Sigfox networks around the world. Here’s the five pack that enables you to get started for real on the Sigfox networks. This enterprise grade IoT platform features the powerful Espressif ESP32 chipset, the SiPy offers a perfect combination of power, friendliness and flexibility. This bundle also include the LoRa/Sigfox antenna and a sensor shield of your choice: the Expansion board, Pysense or Pytrack.
Create and connect your things everywhere. Fast.
SiPy Specifications
- Inexpensive, small and breadboard friendly
- Ultra low power (850uA with the WiFi connection active)
- 100% PYTHON PROGRAMMABLE
- Lots of GPIOs, interfaces and peripherals
- Powerful CPU, BLE and state of the art WiFi radio
- LoPy Size: 55mm x 20mm x 3.5mm (without headers)
- Hardware floating point acceleration
- Python multi-threading
- Weight: 7g
NOTE: Using the Sigfox radio without the external antenna can lead to damage of the device and is therefore not recommended.
Pyscan Features
- 3 axis 12-bit accelerometer
- Ambient light sensor
- RFID-NFC Chip
- USB port with serial access
- LiPo battery charger
- MicroSD card compatibility
- Ultra low power operation (~1uA in deep sleep)
- NFC / RFID Antenna included
Pytrack Features
- Super accurate GNSS Glonass GPS
- 3 axis 12-bit accelerometer
- USB port with serial access
- LiPo battery charger
- MicroSD ard compatibility
- Ultra low power operation (~1uA in deep sleep)
Pysense Features
- Ambient light sensor
- Barometric pressure sensor
- Humidity sensor
- 3 axis 12-bit accelerometer
- Temperature sensor
- USB port with serial access
- LiPo battery charger
- MicroSD card compatibility
- Ultra low power operation (~1uA in deep sleep)
Expansion Board Features
- USB and LiPo battery powered
- FT234XD USB to serial converter
- LiPo battery charger (BQ24040), with options for two different charging currents (100mA and 450mA)
- TPS2115A with reverse voltage protection
- MicroSD card slot
- Three female headers to easily plug in the WiPy, LoPy, SiPy, FiPy or GPy.
- JST style battery connector
- Power LED and charge status LED
- One user LED and one user switch
- Battery voltage monitoring via the WiPy ADC
- Lots of jumpers to enable/disable feature
LoRa/Sigfox Antenna Kit
- External antenna.
- RF Cable Assemblies RP-SMA (Female) JK-IPEX MHF U.FL 1.13 100MM
- RP-SMA (Male) Tilt Swivel 1/2 Wave Whip antenna
- Weight: 21g
PLEASE NOTE: The Espressif ESP32 firmware on Pycom modules is continuously evolving and buyers are reminded that regular firmware updates will be made available.
Compatible with Pymakr plugins