Top seller
No results were found for the filter!
Roadrunner The Roadrunner is a Loco positioning compatible tag that combines the hardware of a Crazyflie with the UWB positioning of the Loco products in a handy package. It's ready for mounting on 3rd party robots and supports power supplies up to...
₹26,949.00 *
Prototyping deck Add a prototyping area to your Crazyflie 2.X and lift your electronics into the air. Just solder directly on the expansion board and plug it to the expansion port. For more information, see the Prototyping deck web page Features...
₹609.00 *
Breakout deck Test new hardware easily without soldering by using the breakout expansion board. Just build the circuit on a breadboard and attach the Crazyflie 2.X to it. The board has all the 20 expansion connector pins available as well as a...
₹609.00 *
Z-ranger deck v2 The Z-ranger deck v2 uses a laser sensor to measure the distance to the ground and adds the possibility to fly with precise height control. Using the ToF sensor VL53L1x the Crazyflie 2.X can measure the distance from the sensor to a...
₹2,549.00 *
Flow deck v2 The Flow deck gives the Crazyflie 2.X the ability to detect its motions in any direction. The VL53L1x ToF sensor measures the distance to the ground with high precision and the PMW3901 optical flow sensor measures movements of the...
₹6,049.00 *
Multi-ranger deck The multi-ranger deck gives the Crazyflie 2.X the ability to detect objects around it. This is done by measuring the distance to objects in the following 5 directions: front/back/left/right/up with mm precision up to 4 meters. To get the...
₹10,449.00 *
Debug adapter One of our goals is to make development with the Crazyflie 2.X as easy as possible. Due to the small size of the platform there are limitations in what connectors we can have and therefore we designed a debug-adapter kit that makes...
₹3,849.00 *
Flow breakout board The Flow breakout board is used for motion tracking and can easily be connected to any robotics project or other design. The motion of a surface, usually the ground, is measured and is reported as delta X, delta Y by the optical flow...
₹4,949.00 *
Motion capture marker deck Placing motion capture markers on the Crazyflie 2.X can be a hassle, but this deck makes it really easy. With lots of holes to mount markers in you can create different configurations to support identification. The deck is designed in...
₹719.00 *
Active marker deck The active marker deck gives uses robust and long range tracking using Qualisys QTM. The deck supports up to 4 IDs so it's possible to have many different configurations without having to carry around bulky spherical markers. The...
₹16,499.00 *
Reflective marker kit 6.5mm Super-spherical markers from Qualisys . The markers are high quality, threaded markers that can be used with the Motion capture marker deck , or stand alone. The markers are designed for maximum roundness and with their solid build, they...
₹9,899.00 *
250mAh LiPo battery including 500mA USB charger 240mAh LiPo battery features Operating Temperature: 0 ～35°C (Charging) / -20～60°C (Discharging) Connector: Molex 51005-2P (Pin 1 positive) Electrical specification Capacity: 240mAh Nominal voltage: 3.7 V (1 Cell) Discharge: 15C Charge:...
₹1,099.00 *
Getting started Flow deck v2 BigQuad deck AI-deck Debug adapter Breakout deck Crazyflie 2.1 Qi 1.2 wireless Crazyflie V2.1 Crazyflie 2.X 4 STEM drone Crazyradio 2.0 Buzzer deck Loco explorer 6 mm DC-motor Loco Male deck The AI bundle - 350mAh LiPo Lighthouse 250mAh LiPo Male long deck 7 mm DC-motor Lighthouse V2 Z-ranger deck Multi-ranger Active marker 4 x 7 mm AI-Deck 1.1 Loco Propeller pack Crazyflie 2.1 Lighthouse Reflective SD-card deck Crazyflie Nano Lighthouse 250mAh LiPo Flapper Nimble LED-ring deck Propeller 47-17 Loco Swarm Flow breakout STEM ranging Battery holder Infinite flight
Viewed