The PT-1000 can be fully submerged in fresh water or salt water, up to the BNC connector indefinitely. • 1 EZO™ RTD Temperature Circuit • 1 Temperature Thermowell (choice of 100mm, 50mm or 30mm) • 1 PT-1000 Temperature Probe with BNC...

Datasheets PT-1000 Temperature Probe Datasheet Documents RoHS Certificate CE Certificate CSA Certificate European legislation Regulation (EU) No 10/2011 European legislation Regulation (EU) No 1935/2004 Connecting probes into a pipe 3D...

RTD Resistance Temperature Detector Reads Temperature Range -126.000 °C − 1254 °C Resolution 0.001 Accuracy +/– (0.10 ̊C + 0.0017* ̊C) Response time 1 reading per sec Supported probes Any type & brand PT-100 or PT-1000 RTD Calibration...

Specification Reads Pressure (PSIG) Range 10 PSIG (68.947 kPa) Resolution 1mv (.0025 PSI /0.017 kPa) Accuracy Connector Tinned leads Response Time Data protocol Analog voltage Data format 0.5 VDC – 4.5 VDC Operating voltage 5 VDC...

Specification Reads Pressure (PSIG) Range 100 PSIG (689.47 kPa) Resolution 1mv (.025 psi /0.17 kPa) Accuracy Connector Tinned leads Response Time Data protocol Analog voltage Data format 0.5 VDC – 4.5 VDC Operating voltage 5 VDC...

Reads Pressure (Gauge) psi (0-50) Default atm (0 - 3.402) bar (0 - 3.447) kPa (0 - 344.738) inches of water (0 - 1,385.38”) cm of water (0 - 3,515.35cm) Response time 1 reading per second Resolution 0.001 Accuracy Threaded connection...

Specification • Tinned lead connector • Accurate to ± 5% • Material: Polypropylene • 1/2” Female NPT Input/Output • Minimum flow rate 5.7 L / min (1.5 GPM) • Maximum flow rate 75.70 L / min (20 GPM) • Weighs 104.3g • Operating...

Specification • 1 EZO™ Universal Flow Meter Totalizer Circuit • 1 1/2" Female NPT Flow Meter - 5.7 L / min to 75.70 L / min • 2 1/2" Male NPT Connectors • 1 Flow Connector Board (soldering required) • 1 80 Mesh stainless steel pre-filter...

• 80 Mesh stainless steel pre-filter (178 microns) • 1/2” Female NPT Input/Output • Max pressure of 861 kPa (120 PSI) • Max temp 100°C (212°F)

• Max pressure 1,585 KPA (230 PSI) • BPA-Free • NSF Standard 58 Certified • Excellent pressure and temperature ratings • Resistance to environmental stress cracking • FDA approved materials

Specification • Tinned lead connector • Accurate to ± 5% • Material: Polypropylene • 1/4” Female NPT Input/Output • Minimum flow rate 378 mL / min (0.1 GPM) • Maximum flow rate 19 L / min (5 GPM) • Weighs 101.5g • Operating temperature...

Specification • 1 EZO™ Universal Flow Meter Totalizer Circuit • 1 1/4" Female NPT Flow Meter - 378 mL / min to 19 L / min • 2 1/4" Male NPT Connectors • 1 Flow Connector Board (soldering required) • 1 80 Mesh stainless steel pre-filter...