This Mini Conductivity Probe can be fully submerged in fresh water or salt water, up to the SMA connector indefinitely. Reads Conductivity Range 5 − 200,000 μS/cm Accuracy +/ – 2% Connector Female SMA Response time 90% in 1s Max pressure...

• 1 meter (3.3') • EZO™ Adapter and 5 pin male header included • Black Silicone Rubber • Cable diameter: 4.85mm • Connects to the following EZO™ Atlas Scientific devices: EZO-PMP™ Embedded dosing pump EZO-CO2™ Embedded NDIR Carbon...

• 12V 1Amp power supply • Power supply connector included • Connects to the Atlas Scientific EZO-PMP™ Peristaltic pump

The EZO-PMP™ Replacement Cassette is available for those who have damaged the cassette and need to replace it, or just wanted to get another one as a backup. These replacement cassettes can be autoclave sterilized.

The Wi-Fi Hydroponics Meter Kit reads pH, Conductivity, and temperature. The pH and Conductivity readings are automatically temperature compensated and uploaded to ThingSpeak, which allows for remote readings on a phone, tablet or PC....

The ENV-TMP-D can be fully submerged in fresh water or salt water, up to the tinned leads indefinitely. • Wide temperature range: -20 Celsius to 133 Celsius • Resolution within two significant figures (XXX.XX) • Accuracy: ± 1°C • Cable...

This simple breakout board is designed to help the embedded systems engineer quickly develop a system using Atlas Scientific™ OEM class devices. This breakout board comes with • (2) 4.7K resistors (used for I2C pull ups). • (1) BNC...

The probe pipe fitting is compatible with all laboratory and consumer grade probes. The pipe fitting comes mated with a PVC Tee and is available in either 1/2” or 3/4” sizes. All laboratory size probes will fit in either size tee....

Features: Low profile Gold plated Brass 50ohm impedance Designed to be easily connected into a breadboard for rapid development Critical component for Atlas Scientific Mini probes

The EZO-PMP™ Tubing Kit can extend the tube length of your embedded dosing pump by up to 2 meters (6.5'). EZO-PMP™ Tubing Kit includes: • 2 meters (6.5') of tubing • 2 inline tubing connectors (does not reduce flow) .

Reads ORP Range -1500mV − 1500mV Accuracy +/– 1mV Response time Continuous analog output Supported probes Any type & brand Calibration Optional Temp. compensation No (unnecessary) Data protocol Analog 0 − 3V Gravity™ dimensions 56.2mm x...

• 1 Gravity™ Analog ORP Sensor / Meter • 1 Consumer Grade ORP Probe • 1 SMA to SMA adapter • 1 ORP calibration solution (225mV) Gravity™ dimensions 56.2mm x 32mm (2.2" x 1.2") Weight: 15 grams This ORP Probe can be fully submerged in...