Top seller
No results were found for the filter!
USB I2C click USB I2C click carries an MCP2221 USB-to-UART/I2C converter. The chip supports full-speed USB (12 Mb/s), I2C with up to 400 kHz clock rates and UART baud rates between 300 and 115200. The board communicates with the target MCU through...
₹1,459.00 *
Expand 4 click Expand 4 click carries TPCIC6A595 , a chip that combines an 8-bit serial-in, parallel-out shift register with an 8-bit D-type storage register. It’s intended for use as a port expander for connecting high power peripherals. On the output...
₹1,569.00 *
PWM click PWM click is a simple solution for controlling 16 PWM outputs through a single I2C interface. You can use it to control anything from a simple LED strip to a complex robot with a multitude of moving parts. The click board carries the...
₹1,569.00 *
I2C 1-Wire click Description I2C 1-Wire click carries DS2482-800 , a “bridge device” that performs bidirectional conversions between I2C masters and 1-Wire slave devices. These can be EEPROM chips, temperature sensors and similar devices that have...
₹2,939.00 *
Expand 3 click Description EXPAND 3 click carries DS2408 , an 8-channel programmable I/O expander that communicates with the target board MCU through a standard Dallas Semiconductor 1-Wire interface (15.3 kbps or 100kbps). The chip also has a...
₹2,099.00 *
I2C Isolator Click Description I2C Isolator click carries ISO1540 , a low-power, bidirectional isolator compatible with I2C interfaces. On the board, the Texas Instruments chip is connected to two sets of I2C pins, one on the mikroBUS connector (SDA, SCL),...
₹1,889.00 *
ETH WIZ click Description ETH Wiz click carries W5500 , a 48-pin, 10/100 BASE-TX standalone ethernet controller with a hardwired TCP/IP Internet protocol offload engine, along with a standard RJ-45 connector. The W5500 module employs a variety of...
₹1,999.00 *
Expand 2 click Description EXPAND 2 click is an accessory board in mikroBUS form factor. It includes a 16-bit I/O expander MCP23017 with I²C clock speeds up to 10 MHz for higher throughput applications. Three HARDWARE ADDRESS SEL jumpers allow you to...
₹1,259.00 *
RS232 click RS232 click is a simple solution for adding RS232 connectivity to your design. RS232 is a serial communications standard mostly used for industrial machines, networking equipment and scientific instruments, as well as for computer...
₹1,579.00 *
PS/2 click PS/2 click is a cost-effective solution for adding keyboard and mouse connectivity to your design. It features a standard 6-pin Mini-DIN PS/2 connector, a mikroBUS™ host socket, and a power indicator LED. PS/2 click communicates with the...
₹949.00 *
Fiber Opt click Fiber Opt click is a compact and easy solution for adding fiber-optic communication to your design. It features IF-D91 fiber-optic photodiode, IF-E97 fiber-optic LED diode as well as two operational amplifiers. Provided plastic optic...
₹3,569.00 *
FTDI click FTDI Click features FT2232H - dual high speed USB 2.0 to UART/I2C/SPI serial interface converter. It includes DA converter and EEPROM as well. The entire USB protocol is handled on the chip (FTDI USB drivers are required), making this...
₹3,049.00 *
Carbon Dioxide LLC-I2C Click RS232 2 click Gemini 335Le PULSE click RS-485 Modbus Google AIY Pi 4 Click Ettus USRP ATA6563 click Carbon Monoxide Hydrogen Stretch click PWM 2 click Kria KR260 ODROID-H4 PLUS Methane CH4 and Ultrasound MCP2517FD click RS232 click LiPo SHIM Holybro M9N GPS Pololu 5V JTAG-SMT2-NC Micro Load Cell Gravity BMP388 UART 1-Wire FTDI click Non-contact Analog 5 1 DOF Fiber Opt click Carbon Fiber Alcohol click Waveshare RS485 4 Click OAK-D LR 5 1 DOF Luminosity e-ink Display SPI Isolator MCP2518FD click Sulfur Dioxide UV 4 click H-Bridge click Genesys ZU Zynq
Viewed