The Intel® RealSense™ Depth Camera D435f (Manufacturer’s Part #99ANHK) is an USB-powered camera that includes wider field of view depth sensors and a RGB sensor. It is ideal for makers, educators, hardware prototyping and software...

The RTL-SDR BLOG V3 is a low-cost software defined radio USB dongle. Perfect for getting into projects that utilize software defined radios or just learning more about them. The RTL-SDR Blog V3 is an improved RTL-SDR dongle. RTL-SDR...

The flight time of U8 Lite L 95KV RC Tiger Motor is 5% longer than other T-motors. It is imported with custom silver wires that reduces copper loss and help lower motor heat by 30%. The max thrust of new U8 motors reaches 7.3kg from 5kg...

The OAK-D LR is a series 2 OAK camera offering 4 TOPS processing power and the ability to run any AI model. It was designed to provide an accurate short range and long range stereo depth perception. This works by having up to 3 stereo...

Improve your flight time with the upgraded battery for your Crazyflie 2.X! The 350 mAh battery boosts the hover-time to above 10 min. This upgrade battery is based on the “Tattu 350mAh 3.7V 30C 1S1P” cell and with some additional great...

Robotics Access for Everyone: rae The first ever fully-formed robot from Luxonis is open-source and packed with power. ROS 2, SLAM, RVC3, DepthAI, and much more all come standard right out of the box. Use rae in combination with Unity...

These shorting blocks make great removable jumpers and fit standard 0.1" male header pins. 0.100" (2.54 mm) shorting blocks of assorted colors on a 0.1" header strip.

These shorting blocks make great removable jumpers and fit standard 0.1" male header pins. 0.100" (2.54 mm) shorting blocks of assorted colors on a 0.1" header strip.

These shorting blocks make great removable jumpers and fit standard 0.1" male header pins. 0.100" (2.54 mm) shorting blocks of assorted colors on a 0.1" header strip.

These shorting blocks make great removable jumpers and fit standard 0.1" male header pins. 0.100" (2.54 mm) shorting blocks of assorted colors on a 0.1" header strip.

These 0.1" female header strips are commonly used as low-cost connectors for custom-made cables or perforated prototyping PCBs. The standard spacing is the same as on most solderless breadboards and matches 0.1" male header strips . Our...

These universal mounting hubs are designed to work with most 6 mm diameter shafts , including round shafts and “D” shafts. Each of the two included hubs has six mounting holes for M3 screws (not included), letting you mount custom wheels...