Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
 
585 From 637
No results were found for the filter!
AI-deck monocrome camera module
AI-deck monocrome camera module
This is a monochrome camera module to exchange the color camera module (Bayer RGB) for, which comes with the AI-deck . This is handy if you rather work with greayscale images. The Bayer RGB can be converted to gray-scale as well but then...
₹2,309.00 *
micro-USB cable (48cm)
micro-USB cable (48cm)
Standard micro USB cable. Features: USB A male connector USB Micro B male connector 48cm in length (~19 inches)
₹609.00 *
Getting started bundle - Crazyflie 2.1+
Getting started bundle - Crazyflie 2.1+
The "Getting started bundle" has everything you need to dive into the Crazyflie platform to start exploring flying robotics. Aside from the Crazyflie 2.1+ this bundle also includes the Crazyradio, which enabled connection to a computer...
₹29,749.00 *
6 mm DC-motor
6 mm DC-motor
Spare 6x15 mm brushed coreless DC motor for the Crazyflie Nano Quadcopter (Crazyflie 1.0). Electrical specifications: Kv: 12000 rpm/V Rated voltage: 4.2 V Rated current: 810 mA Mechanical specifications: Diameter: 6 mm Length: 15 mm...
₹329.00 *
Crazyflie Nano Quadcopter - 4 x spare motor mount
Crazyflie Nano Quadcopter - 4 x spare motor mount
Spare motor mount for the Crazyflie Nano Quadcopter. Specifications: Weight: ~0.21g Plastic: PP Package Contents: 4 x Motor mount Resources: Datasheet
₹549.00 *
250mAh LiPo battery
250mAh LiPo battery
Make sure to get the maximum amount of flight-time from your Crazyflie 2.X using this spare battery. Features: Operating Temperature: 0~45°C (Charging) / 0~60°C (Discharging) Connector: Molex 51005-2P (Pin 1 positive) Package Contents: 1...
₹719.00 *
7 mm DC-motor
7 mm DC-motor
Spare Crazyflie 2.X brushed coreless DC-motor. Mechanical specifications: Diameter: 7.0 mm Length: 16.0 mm Shaft length: 3.5 mm Shaft diameter: 0.8 mm Weight: 2.7 g Wire length: 32.0 mm Molex Picoblade 2P connector Electrical...
₹439.00 *
Battery holder deck
Battery holder deck
Spare battery holder deck for Crazyflie 2.X. Mechanical specifications: Weight: 0.4g Size (WxHxD): 28x28x4mm Package contents: 1 x Battery holder deck Ressources: Datasheet
₹609.00 *
Male deck connector
Male deck connector
This product is intended to be used together with the Crazyflie 2.X expansion deck system. Package contents 4 x short male expansion pin-header (top 9mm long) 4 x medium male expansion pin-header (top 15mm long) Resources Datasheet
₹279.00 *
Waterproof DS18B20 Digital Temperature Sensor for Arduino
Waterproof DS18B20 Digital Temperature Sensor...
This is a waterproofed version of the DS18B20 Temperature sensor . Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it...
₹689.00 *
Tsunami Super WAV Trigger (Qwiic)
Tsunami Super WAV Trigger (Qwiic)
Based on a new generation ARM Cortex M7, the Qwiic Tsunami Super WAV Trigger extends polyphony to 32 mono or 18 stereo simultaneous uncompressed 44.1kHz, 16-bit tracks. Each track can start, pause, resume, loop and stop independently,...
₹9,449.00 *
Dagu Wild Thumper 4WD All-Terrain Chassis, Black, 75:1
Dagu Wild Thumper 4WD All-Terrain Chassis,...
This rugged, 4-wheel-drive chassis from Dagu Electronics is a smaller version of the Wild Thumper 6WD chassis . It is designed to excel at traversing rough terrain, making it a great platform for any robot that needs to perform tasks in...
₹28,499.00 *
585 From 637
Viewed