JETBOT 2GB AI KIT AI-Based Smart Robot Powered By NVIDIA Jetson Nano 2GB Developer Kit Note : the Jetson Nano 2GB Developer Kit is optional. AI-Based "Actual Smart" Smart Robot Is Always The Favorite Project Of Electronic Enthusiasts,...

These universal mounting hubs are designed to work with most 4 mm diameter shafts, including round shafts, and “D” shafts. Each of the two included hubs has four mounting holes for M3 screws (not included), letting you mount custom...

Overview AlphaBot is a robotic development platform compatible with Raspberry Pi and Arduino. It consists of the AlphaBot mainboard, the mobile chassis, and everything required to get it moving. Just connecting a controller board,...

These magnetic discs can be used with our mini plastic gearmotors (extended motor shaft versions only) as part of a quadrature encoder system that offers 12 counts per revolution . They are 2 mm thick with an outer diameter of 9.7 mm and...

Get everything you need to keep your Crazyflie 2.X in shape even after some hard crashes. Bundle content 2 x Crazyflie 2.X spare motor (7mm DC motors) 2 x Crazyflie 2.X spare motor mounts pack (total of 8 motor mounts) 1 x Crazyflie 2.X...

Spare counter rotating propellers pack (4 x CCW + 4 x CW) Specifications Size: 45 mm Fits shaft: 0.8 mm Package content 4 x CW propeller 4 x CCW propeller

The SparkFun ESP32 Thing Plus C is a comprehensive development platform for Espressif's ESP32 . Like the 8266 and ESP32 Thing, the ESP32 Thing Plus is a WiFi-compatible microcontroller with support for both Bluetooth Classic (i.e. SPP)...

SparkFun has teamed up with CircuitDojo to bring you the SparkFun nRF9160 Thing Plus, featuring the powerful Nordic nRF9160 microcontroller in a Feather-compatible footprint. This little chip is capable of both CAT M1 LTE and NB-IoT...

This SparkFun Triple-Axis Accelerometer Breakout is a simple Qwiic breakout for the KX132 digital accelerometer from Kionix. The KX132 is a low-power, 16-bit resolution three-axis accelerometer with four user-selectable acceleration...

The Z-ranger deck uses a laser sensor to measure the distance to the ground and adds the possibility to fly with precise height control. Using the ToF sensor VL53L0x the Crazyflie 2.X can measure the distance from the sensor to a ground...

The "Happy hacker bundle" has everything you need to get started with software, firmware and hardware development. Using the debug adapter you'll be able to do advanced debugging as well as real-time logging and parameter setting though...

The STMicroelectronics VL6180X Time of Flight Ranging Sensor embeds ST’s patented FlightSense™technology that allows distance to be accurately measured independent of target reflectance. The sensor is rated to perform ranging...