The Pmod TPH2 offers 12 external pin headers so that users can easily test the GPIO signals passing through each of the pins. Features: 12 external test point headers Easily access and test signals passing through Small PCB size for...

The Pmod USBUART provides a USB to UART cross-conversion through the FTDI FT232R . Users may send data in either direction on the Pmod and receive the converted data in the appropriate format. Note: There are two UART signal pin...

The Digilent Pmod RS232 converts between digital logic voltage levels to RS232 voltage levels using the Maxim Integrated MAX3232 transceiver . The RS232 module is configured as a data communications equipment (DCE) device. It connects to...

The Pmod SWT provides users with four slides switches for up to 16 different binary logic inputs to for the attached system board. Note: The Pmod SWT is also featured in a fantastic product bundle, the Arty S7 Pmod Pack ! This bundle was...

The Pmod KYPD is a 16-button keypad arranged in a hexidecimal format (0-F). By digitally driving a column line to a logic low level and digitally reading each of the rows, users can determine which button is currently pressed. Features:...

The Digilent Pmod ALS demonstrates light-to-digital sensing through a single ambient light sensor. Digilent Engineers designed this Pmod around Texas Instrument's ADC081S021 analog-to-digital converter and Vishay Semiconductor's...

Features: Provides the option to separate 6 signals using MTE connectors 6-pin connectors are standard 100mil spaced 25mil square connectors Can be used with any Digilent board Ideal for testing and verification

The Pmod ACL2 is a 3-axis MEMS accelerometer powered by the Analog Devices ADXL362 . By communicating with the chip via the SPI protocol, users may receive up to 12 bits of resolution for each axis of acceleration. Additionally, this...

The Pmod ENC features a rotary shaft encoder with an integral push-button to provide multiple types of outputs such as a way for users to quickly switch between multiple choices shown on a screen or predefined motor speeds. The module...

The Digilent Pmod AD1 is a two channel, 12-bit analog-to-digital converter that features Analog Devices AD7476A . With a sampling rate of up to 1 million samples per second, this Pmod is capable of excelling in even the most demanding...

The Pmod AD2 is an analog-to-digital converter powered by the Analog Devices AD7991. Users may communicate with the board through I 2 C to configure up to 4 conversion channels at 12 bits of resolution. Features: Up to four 12-bit...

The Pmod OLED is 128x32 pixel monochrome organic LED (OLED) panel powered by the Solomon Systech SSD1306. Users can display any sort of graphical design by programming the device through SPI as well as sending bitmap images. This module...