The "poor man's" accelerometer/motion sensor! These spring-vibration switches are high sensitivity non-directional vibration induced trigger switches. Inside is a very soft spring coiled around a long metal pin. When the switch is moved,...

Piezo buzzers are used for making beeps, tones and alerts. This one is petite but loud! Drive it with 3-30V peak-to-peak square wave. To use, connect one pin to ground (either one) and the other pin to a square wave out from a timer or...

Listen up! This set of two 2.8" x 1.2" speakers are the perfect addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like these speakers as they are small and enclosed for good audio...

Features: Acts as a female-to-male gender changer for a 2x6 pin female header or cable Can connect any two Digilent 2x6 pin cables together Provides easy access for test and measurement Ships in a pack of 5

Features: 9" in length Can be used with any Digilent board Ideal for testing and verification

Features: 9" in length Can be used with any Digilent board Ideal for testing and verification

Note: This Product has pins for through-hole mounting and is not suitable for surface mounting. Features: Perfect for our Cmod or anything in the 2x20-pin DIP package Current rating: 1Amp Contact resistance: 20mΩ max

Features: 5VDC switching supply, with 4000mA current Comes with US and EU plug adapters For use with Digilent FPGA & Microcontroller boards

This 12V 5A AC/DC adapter is the perfect solution for powering your Digilent NetFPGA-1G-CML board. With the PCIe output connector, you can use this power supply with other devices that use PCIe power connectors. Note: Not recommended for...

This 12V 5A AC/DC adapter is the perfect solution for powering your Digilent NetFPGA-1G-CML board. With the PCIe output connector, you can use this power supply with other devices that use PCIe power connectors. Note: Not recommended for...

Features 6" in length Can be used with any Digilent board Ideal for testing and verification Ships in pack of 5

Our female-to-female 2-pin MTE cables are an ideal way to test your signals and verify your project. Choose from lengths of 9" or 18" to fit your needs. Each order ships in a pack of five. Features: Available in lengths of 9" and 18" Can...