Over the years, we have tested an endless number of conductivity probe designs. Our research has shown us that not all conductivity probes are the same. Many lower-quality probes are susceptible to “fringe effect,” which makes the...

Reads Conductivity Total dissolved solids (ppm) Salinity = PSU (ppt) 0.00 − 42.00 Range 0.07 − 500,000+ μS/cm Accuracy +/ – 2% Response time 1 reading every 640ms Supported probes K 0.01 – K 600 any brand Calibration 1 or 2 point Temp...

Reads Conductivity = μS/cm Total dissolved solids = ppm Salinity = PSU (ppt) 0.00 – 42.00 Specific gravity (sea water only) = 1.00 – 1.300 Range 0.07 − 500,000+ μS/cm Accuracy +/ – 2% Response time 1 reading per sec Supported probes K...

Specification • 1 IXIAN™ Conductivity Transmitter • 1 Industrial Conductivity Probe K 1.0 • 3/4″ NPT pipe thread on input and output side • 2 250ml (8oz) calibration solutions K 1.0 – This set includes 1 (1,413µS) and 1 (12,880µS) Probe...

Reads Conductivity Range 5 − 200,000μS/cm Accuracy +/ – 2% Connector Tinned leads Response time 90% in 1s Max pressure 200 PSI Max depth 60m (197 ft) Temperature range °C 0 − 110 °C Cable length 3 meters Pipe fitting 3/4" threaded NPT...

Those of us who work with PLCs clearly understand both the power and limitations of industrial computers. Modern low voltage elections and communication protocols aren’t easily compatible with PLCs. Fortunately, the Atlas Scientific...

Reads Gaseous CO2 Range 0 − 10,000 ppm Calibration Factory calibrated Response time 1 reading per second Resolution 1 ppm Accuracy +/- 3% +/- 30 ppm Connector 5 lead data cable Warmup time 10 seconds Cable length 1 meter Data protocol...

• This temperature thermowell is used to protect temperature probes placed in systems with high pressure or flow. • 100mm thermowell extension • Temperature range: -273°C to 1300°C • Threading: 1/2" NPT • Material: 304 stainless steel •...

• This temperature thermowell is used to protect temperature probes placed in systems with high pressure or flow. • 30mm thermowell extension • Temperature range: -273°C to 1300°C • Threading: 1/2" NPT • Material: 304 stainless steel •...

• This temperature thermowell is used to protect temperature probes placed in systems with high pressure or flow. • 50mm thermowell extension • Temperature range: -273°C to 1300°C • Threading: 1/2" NPT • Material: 304 stainless steel •...

The PT-1000 can be fully submerged in fresh water or salt water, up to the BNC connector indefinitely. • 1 EZO™ RTD Temperature Circuit • 1 Temperature Thermowell (choice of 100mm, 50mm or 30mm) • 1 PT-1000 Temperature Probe with BNC...

Datasheets PT-1000 Temperature Probe Datasheet Documents RoHS Certificate CE Certificate CSA Certificate European legislation Regulation (EU) No 10/2011 European legislation Regulation (EU) No 1935/2004 Connecting probes into a pipe 3D...