This is an NB-IoT (NarrowBand-Internet of Things) HAT for Raspberry Pi, controlled via serial AT commands, supports communication protocols like LWM2M/COAP/MQTT, etc. Due to the advantages of low delay, low power, low cost, and wide...

This is a 5.5inch AMOLED display. Compared with LCD, it has advantages of high contrast, wide color gamut, and wide viewing angle, which make it able to bring vivid and delicate visual experience. Note: Raspberry Pi is NOT included....

Connect NCD IoT devices to your Ethernet network using this Ethernet communication to I2C conversion adapter. This Ethernet communication adapter features a Lantronix XPort Ethernet communications module married to our custom I2C...

The ADUE is a +5V Dual I2C Expansion Shield for the Arduino Due. This shield acts as a gateway to the entire NCD I2C product line, allowing limitless expansion possibilities. This shield could be the single most significant shield for...

The PPESCREW offers a convenient screw terminal breakout board and Power for Particle Electron. The PPESCREW includes an integrated I2C port for easy expansion to the entire ControlEverything.com I2C Product Line. The PPESCREW is...

The Onion Omega Expansion Dock provides an easy way to power the Omega with any Micro USB cable and breaks out the Omega’s GPIO pins. You can use GPIO to control external circuits or connect Expansion boards to extend the functionality...

Onion Omega 2+ is a tiny but super powerful IoT computer. it runs on Linux and comes with WiFi, on-board memory, and all the major communication interface technology. Onion Omega2+ comes with an external MicroSD card. A. CPU 500MHz B....

Onion Omega 2 is a tiny but super-powerful IoT computer. Omega 2 runs on Linux and comes with WiFi, on-board memory, and all the major communication interface technologies. A. CPU 500MHz B. Memory 128MB C. USB 2.0 D. UART, PWM, GPIO,...

The OODK is one of the most desired Onion Omega Adapter. This Onion Omega Dock adapter acts as a bridge between onion Omega Docks and NCD I2C devices. Using this adapter you can use Onion Omega docs with ncd.io devices. This Onion Omega...

Its an I2C DIP for C.H.I.P. with On-board Power control. On Board, power control makes it ideal for battery-powered application. The power to the I2C ports are controlled by XIOP2/GPIO01. To turn off the power on I2C Ports you will need...

If you ever wanted to test or use NCD IoT devices with a desktop computer, this little USB to I2C adapter will save you lots of time. Plug this device into any available USB port on your PC and it mounts as a COM port. We use the FT230XS...

The WPXB is perhaps one of our most powerful communication adapters. Add long range wireless communications to any of our WiPy devices, greatly expanding communication options. Expand your WiPy controller to include industrial wireless...