Top seller
No results were found for the filter!
This soft potentiometer is an interesting way to add an adjustable resistor / slide potentiometer to your wearable. You can use it to adjust the brightness of an LED, or as a sensor input to your Flora or Gemma. When the ring slides up...
₹769.00 *
This knit conductive fabric is 100% silver and super luxe! Use small pieces on the tips of gloves or in any soft circuit situation where you need a bit of stretch. This highly conductive fabric has a resistance of less than 1 ohm per...
₹1,099.00 *
That's one slim cellular antenna! At just 75mm long from tip to tip and and with a thickness of just 2mm, this 3dBi GSM antenna is slim, compact and sensitive, with a 3dBi gain. The antenna juts out from its base with stick-on back so...
₹329.00 *
This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every...
₹2,199.00 *
Make your Internet of Things device cable-free by adding super WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but high-reliability wireless link. We tried half a dozen modules to find ones that...
₹2,199.00 *
Trinket's got a big sister in town - the Pro Trinket 5V! Pro Trinket combines everything you love about Trinket with the familiarity of the common core Arduino chip, the ATmega328. It's like an Arduino Pro Mini with more pins and USB...
₹1,099.00 *
If you have a modern smart phone you may have noticed that it comes with built in wireless charging capability called 'Qi charging.' Qi is a trademark name for a thin and smart inductive charging system. Many large gadget companies have...
₹2,969.00 *
If you have a modern smart phone you may have noticed that it comes with built in wireless charging capability called 'Qi charging.' Qi is a trademark name for a thin and smart inductive charging system. Many large gadget companies have...
₹2,749.00 *
This is the assembled version of the Pi T-Cobbler Plus. It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2,Pi 3! (Any Pi with 2x20 connector) The Raspberry Pi has landed on the Maker World like a 40-GPIO pinned, quad-USB...
₹879.00 *
If you have a modern smart phone you may have noticed that it comes with built in wireless charging capability called 'Qi charging.' Qi is a trademark name for a thin and smart inductive charging system. Many large gadget companies have...
₹1,649.00 *
Ever since the Kindle eReader came out, we've been wanting a nice small graphical eInk display that is easy to use with a microcontroller. And finally our desires have been fulfilled with the rePaper 2.7" development board from Pervasive...
₹4,399.00 *
That new Raspberry Pi® Model A or B computer you just got has a row of 2x13 pin headers soldered on - those are the GPIO (general purpose input/output) pins and for those of us who like to hack electronics they are where the real fun is....
₹329.00 *
Adafruit Adafruit Electret Adafruit 9-DOF MPL3115A2 - I2C MPM3610 3.3V Pressure-Sensit Enameled Copper ADXL345 - MCP3008 - Leap Motion Lithium Ion Adafruit Adafruit Adafruit Adafruit Compact Adafruit Thermal Paper Adafruit HUZZAH Bluefruit LE Adafruit Adafruit Adafruit ESP32-S3-DevKit Analog UV Light Adafruit DC Adafruit Mini Remote Thermal Paper Adafruit Bluetooth Adafruit Adafruit CAP1188 - 8-Key Lithium Ion Medium 6V 2W ADS1115 16-Bit Adafruit FONA - 1.8 SPI TFT UBEC DC DC Adafruit BH1750 MiFare Classic Fingerprint Adafruit GPIO Ribbon
Viewed